TEMPERED AIR (COMPENSATING) OVERHEAD GREASE EXHAUST HOODS

Tempered Air (Compensating) hoods introduce tempered (heated and/or cooled) or untempered air into the kitchen independent of other make-up air systems.  In most climates, to maintain a comfortable working temperature in the kitchen, it will be necessary to heat and/or cool outside air supplied through a tempered air hood.
 

STANDARD CONSTRUCTION
STANDARD CONSTRUCTION
AVAILABLE MODELS
AVAILABLE MODELS
OPTIONS AND ACCESSORIES
OPTIONS AND ACCESSORIES
SIZE AVAILABILITY
SIZE AVAILABILITY
  • 18 gauge type 304 (or optionally type 430) stainless steel
  • Exterior seams continuously welded, liquid tight, ground and polished
  • UL and NSF Listed
  • Meets NFPA 96 and National Electrical Code requirements
  • Supply air plenum on front of hood with aluminum discharge grilles
  • Supply air fire dampers if required by UL & NFPA 96
  • Incandescent light fixtures
  • Full length pitched grease trough with removable grease cup
  • Aluminum baffle type filters
  • Factory installed collars
  • Hanger brackets
  SUBMITTAL CATALOG SPECIFICATION  
KS-200T Wall Hood PDF PDF VIEW / WORD / PDF
KSI-200T Double Island Hood PDF PDF VIEW / WORD / PDF
KS-300T Wall Hood PDF PDF VIEW / WORD / PDF
KSI-300T Double Island Hood PDF PDF VIEW / WORD / PDF
KS-300T-PG Perforated Face Wall Hood PDF PDF VIEW / WORD / PDF
KSI-300T-PG Perforated Face Dbl. Island Hood PDF PDF VIEW / WORD / PDF
KS-400T Wall Hood PDF PDF VIEW / WORD / PDF
KSI-400T Double Island Hood PDF PDF VIEW / WORD / PDF
       
OTHER INFORMATION:      
Filters PDF PDF  
Lights   PDF  
Installation and Maintenance Manual (PDF)      
Collar Installation Manual (PDF)      
Balancing Manual (PDF)      

KS-200T, 300T and 400T hoods are available in a single section in any increment of length from 4' to 16' (two sections recommended for hoods over 12' in length. Longer lengths are obtained by butting multiple sections together utilizing factory supplied welded joint covers.

Tempered air hoods are available in any increment of capture width from 3' to 6' 6".

The height for non-pitched hoods can vary in any increment from 2' to 3'.  The minimum front height for pitched hoods in 1' 4" with a minimum back height of 2'.

Tempered air double island hoods are typically wall hoods back to back, with an available option of single piece construction up to 12' long by 8' wide.

AVAILABLE KITCHEN HOOD MODELS: