EXHAUST ONLY OVERHEAD GREASE EXHAUST HOODS

Exhaust only hoods provide an overhead canopy for grease exhaust without any provision for introducing untempered air directly into the hood (see Model KS-100 Energy Saving/Short Cycle hood) or for introducing tempered air into the kitchen from an integral plenum (see Models KS-200T, KS-300T and KS-400T Tempered Air Hood).  Separate plenums for introduction of tempered are an available option for exhaust only hoods.
 

STANDARD CONSTRUCTION
STANDARD CONSTRUCTION
AVAILABLE MODELS
AVAILABLE MODELS
OPTIONS AND ACCESSORIES
OPTIONS AND ACCESSORIES
SIZE AVAILABILITY
SIZE AVAILABILITY
  • 18 gauge type 304 (or optionally type 430) stainless steel
  • Exterior seams continuously welded, liquid tight, ground and polished
  • UL and NSF Listed
  • Meets NFPA 96 and National Electrical Code requirements
  • Incandescent light fixtures
  • Full length pitched grease trough with removable grease cup
  • Aluminum baffle type filters
  • Factory installed collars
  • Hanger brackets
  SUBMITTAL CATALOG SPECIFICATION  
KA Wall Hood PDF PDF VIEW / WORD / PDF
KA Low Profile Wall Hood PDF PDF VIEW / WORD / PDF
KA Wall Hood w/ Rear Supply Plenum PDF PDF VIEW / WORD / PDF
KA Wall Hood w/ Front Supply Plenum PDF PDF VIEW / WORD / PDF
KB Single Island Hood PDF PDF VIEW / WORD / PDF
KB Double Island Hood PDF PDF VIEW / WORD / PDF
KB Double Island Hood w/ Front Supply Plenum PDF PDF VIEW / WORD / PDF
       
OTHER INFORMATION:      
Filters PDF PDF  
Lights   PDF  
Installation and Maintenance Manual (PDF)      
Collar Installation Manual (PDF)      
Balancing Manual (PDF)      

KA hoods are available in a single section in any increment of length from 4' to 16' (two sections recommended for hoods over 12' in length. Longer lengths are obtained by butting multiple sections together utilizing factory supplied welded joint covers.

KA hoods are available in any increment of width from 3' to 6' 6".

The height for non-pitched hoods can vary in any increment from 2' to 3'. The minimum front height for pitched hoods in 1' 0" with a minimum back height of 2'.

KB double island hoods are typically KA hoods back to back, with an available option of single piece construction up to 12' long by 8' wide.

AVAILABLE KITCHEN HOOD MODELS: