INDUSTRIAL AND CUSTOM EXHAUST HOODS

These products are used in facilities such as industrial, manufacturing, chemical processing, metal finishing, plating and pickling, process tank venting, waste water treatment, schools, food processing, material handling, pharmaceuticals, and vehicle maintenance to remove heat, moisture, dust, fumes, vapors, grease, oils, chips, particles, paint or engine exhaust.

Industrial and custom hoods are welded construction and available in a wide variety of types and materials for virtually any exhaust applications.

Industrial and custom hoods can be manufactured to literally any size.  Single piece construction is available to as large as can be shipped by truck. Larger sizes are available in multiple sections for field assembly.

Available are standard types or custom fabrication to specific customer requirements.
 

STANDARD CONSTRUCTION
STANDARD CONSTRUCTION
AVAILABLE
MODELS
AVAILABLE
MODELS
OPTIONS AND ACCESSORIES
OPTIONS AND ACCESSORIES
MATERIALS AND FINISHES
MATERIALS AND FINISHES
APPLICATION INFORMATION
APPLICATION INFORMATION
CUSTOMIZATION
CUSTOMIZATION
  • 18 gauge galvanized steel
  • 18 gauge T304 or T316 stainless steel
  • .063" aluminum
  • Thermoplastic
  • Welded seams
  SUBMITTAL CATALOG  
Overhead Canopy PDF PDF  
Slotted Back Shelf Hood PDF PDF  
Slotted Back Shelf Series S-3 PDF PDF  
Slotted Barrel Hood PDF PDF  
Welding Table PDF PDF  
Constant Velocity Discharge Head PDF    
Thermoplastic Overhead Canopy PDF PDF  
Thermoplastic Back Shelf PDF PDF  
Thermoplastic Tank Exhaust PDF PDF  
       
  • Internal baffles
  • Perimeter slot
  • Double shell
  • Dampered slot
  • Side skirt
  • Gutter and Drain
  • Filter rack
  • Mounted switch
  • Light fixture
  • Make-up air plenum

MATERIALS

  • Steel
  • Galvanized Steel
  • Paintable galvanized steel
  • Aluminized steel
  • Aluminum
  • T304 stainless steel
  • T316 stainless steel
  • Polyvinyl Chloride (PVC)
  • Chlorinated polyvinyl chloride (CPVC)
  • Polyethylene (PE)
  • Polypropylene (PP)

SHEET METAL FINISHES

  • Mill
  • Ground and polished welds
  • Primer
  • Enamel (white, grey, stock or custom color)
  • Epoxy (white or custom color)
  • Phenolic

THERMOPLASTIC FINISHES

  • Mill

For additional information regarding industrial hood applications refer to:

Industrial Ventilation Manual
American Conference of Governmental Industrial Hygienists
Cincinnati, OH 45211
513-742-2020
www.acgih.org

ASHRAE Hand Books
American Society of Heating, Refrigeration and Air Conditioning Engineers, Inc.
1791 Tullie Circle, N.E.
Atlanta, GA 30329
404-636-8400
www.ashrae.org

Custom hoods are available fabricated to customer supplied requirements. FAX or e-mail a sketch or drawing to KEES for quotation.
Some examples of custom fabricated hoods are:

Adjustable height canopy with counterweight
Back shelf hood with front extension & flexible curtains
Back shelf hood with pad filter frames
Barrel filling hood
Conical overhead hood
Downdraft table
Equipment enclosure
Melting furnace hood
Spray booth