KEES, INC. is a manufacturer of a wide variety of accessories and specialty items for the commercial sheet metal HVAC, architectural specialties and food service industries.

STANDARD CONSTRUCTION

Energy Saving grease exhaust hoods are double wall type constructed of 18 gauge, type 304 stainless steel with a satin polish. All exterior seams are continuously welded, liquid tight, and are ground and polished to match the original finish of the material. Supply air is delivered to the interior of the hood through patented adjustable air nozzles (U.S. Patent No. 4,117,833). The supply air plenum has a full length perforated metal air distribution plate and is insulated with 1", 3# density rigid aluminum foil faced insulation with all joints hot sealed with aluminum foil tape. The hood end panels are double wall construction with 1" thick, 3# density insulation. The hoods are UL and NSF listed, meet the requirements of NFPA 96 and the National Electrical Code. The hoods include incandescent light fixtures on approximately 3 foot centers wired to a junction box on top of the hood, full length pitched grease trough with removable grease cup, aluminum baffle type filters, hanger brackets and factory installed collars and supply air fire damper.

Construction/submittal drawings are available in PDF format, with some drawings in standard (read only) and form (text boxes) format.  You will need Acrobat Reader to view and print standard format or Adobe Acrobat to utilize text boxes.  Acrobat Reader is available at no charge from the Adobe Website.  You will be able to follow the links below to open and view.  Use the back arrow to return to this page.

Available Models:

•	KS-100 Wall Hood	Std. PDF	Form PDF
•	KS-100-P Pitched Wall Hood	Std. PDF	Form PDF
•	KSI-100 Single Island Hood	Std. PDF	Form PDF
•	KSI-100 Double Island Hood	Std. PDF	Form PDF

OPTIONS AND ACCESSORIES

Available options include: pitched hood (shorten the front height for mounting in low ceiling applications; 16 inch minimum front height), welding hood sections together for single piece construction longer than 12' (16' maximum single piece length), supply air balancing damper, exhaust air fire damper, standoff spacer on back of hood (uninsulated or insulated), fluorescent lights, no lights, stainless steel baffle filters, Flame Gard filters, loose or mounted switches & pilot lights, 16 or 14 gauge construction, end skirts, back splash (uninsulated or insulated), top enclosures, finished back on wall hood (wall hood used for a single island application), painted hood exterior, cabinet on end of hood for mounting fire suppression hardware and/or controls, and installed fire protection.

• Skirt & Back Splash
• Cabinet on End of Hood
• Fire Suppression Syste

SIZE AVAILABILITY

KS-100 hoods are available in a single section in any increment of length from 4' to 16' (two sections recommended for hoods over 12' in length). Longer lengths are obtained by butting multiple sections together utilizing factory supplied welded joint covers. KS-100 hoods are available in any increment of capture width from 3' to 5' 6". The height for non-pitched hoods can vary in any increment from 2' to 3', the minimum front height for pitched hoods is 1' 4" with a minimum back height of 2'.

KSI-100 hoods are two or more KS-100 hoods back to back. The KSI-100 single island hood is available in a single section up to 12' long by 8' wide.

TYPICAL SPECIFICATIONS

AVAILABLE MODELS

• Energy Saving (Short Cycle) Overhead Grease Exhaust Hoods (current document)
• Exhaust Only Overhead Grease Exhaust Hoods
• Tempered Air (Compensating) Overhead Grease Exhaust Hoods
• Energy Saving (Summer/Winter) Overhead Grease Exhaust Hoods
• Energy Saving Retro-Fit Hood Conversion Kits
• Exhaust Only Back Shelf and Oven Grease Exhaust Hoods
• Exhaust Only Overhead Moisture or Heat Only Exhaust Hoods