|
ARCHITECTURAL STAMPED AND LATTICE GRILLES
- MATERIALS AND FINISHES
| Materials and Gauges |
|
Stamped grilles are available in steel, galvanized steel, stainless
steel (type 304 or 316), aluminum, brass (muntz alloy 280 — color match to architectural bronze), commercial bronze (alloy 220), or copper (alloy 110) in a variety
of thicknesses as summarized below:
- Steel and galvanized steel; 24 gauge thru 3/16" thick,
1/4" thick available for some applications
- Stainless steel; 24 gauge thru 10 gauge
- Aluminum; .080" thru 3/16" thick
- Brass, bronze, and copper; .080" thru 3/16" thick.
Individual patterns may be limited to gauges lighter than the maximums
listed above. Click here for maximum recommended gauges
for any specific pattern.
|
| Finishes |
| Stamped grilles are available in a wide variety of standard
and custom finishes. Click
here for list of standard paint finishes.
A color chart is also available both as a web
page and in pdf
format.
- Steel and galvanized steel; mill, primer, lacquer, enamel or
epoxy in standard or paint-to-match colors
- Stainless steel; mill, satin polish, mirror polish, primer,
lacquer, enamel or epoxy in standard or paint-to-match patterns
- Aluminum; mill, satin polish, clear or color anodize, primer,
enamel or epoxy in standard or paint-to-match colors
- Brass and bronze; satin polish, mirror polish, oxidized with
or without lacquer.
- Copper; mill, oxidized with
or without lacquer.
|
|
